Product Categories

E4FMR Series Ceiling Mount

• LED Round Flushmount Fixture CCT-select
  & Wattage Select
• 5 Size Options
• 5 year Warranty

ML Series 4in Downlight

• Durable die-casting aluminum lamp housing with excellent
  heat dissipation,provide maximum airflow for the SMD LED light source.
• CCT Adjustable function – 3 light color in one light.
• Dimmable from 100% down to 10% smoothly
• Contains SMD2835 LED module that offer high light color
  uniformity, 9 watts up to 700 lumens

ML Series 6in Downlight

• super slim housing design, perfect for limited
  space installation locations
• contains a LM80 rated
  SMD LED module that offer high light
  color uniformity, 12 watts up to 950
• Available in 3000K, 4000K, 5000K color temperature.
• This slim panel light is dimmable
  from 100% down to 5% smoothly
• Includes two spring loaded clips
  to attached to any ceiling material.
• Three “Quick connect” push-in
  terminals for fast and easy wiring.
• Suitable for dry/damp locations. •Approved for direct contact with
  insulation. (Type IC)

LS Series Emergency Floods

Injection-molded thermoplastic ABS housing
UL-94V-0 flame rating, fire-resistant
Input Voltage: 120-277V
Power consumption: 2W max.
Output: 2.4W max.
3.6V Nickel Cadmium Battery
Charging time: 24 hours
Discharge time: 90 minutes

LS Series Combo Exit Light

Injection-molded thermoplastic ABS housing
UL-94V-0 flame rating, fire-resistant
Input Voltage: 120/277V
Power consumption: 3.5W max.
Output: 3W max.
3.6V Nickel Cadmium Battery
Charging time: 24 hours
Discharge time: 90 minutes

Available in Red or Green

LS Series Exit Light

Injection-molded thermoplastic ABS housing
UL-94V-0 flame rating, fire-resistant
Input Voltage: 120/277V
Power consumption: 4W max.
Output: 1W max.
1.2V Nickel Cadmium Battery
Charging time: 24 hours
Discharge time: 90 minutes

Available in Red or Green

EcoMax F Series

IP65.
· Battery back up.
· Motion sensor and daylight sensor.
· Color changeable and power adjustable.

LP Series Panel

Optical design, greatly improved the light utilization and evenness.
 High efficiency LED Driver, voltage AC120-277.
 UL 1598 suitable for damp locations,Type IC.
 Adjustable power, adjustable color temperature.
 The 0-10V Dimming type is continuous.

The Back-lit LED panel Lighting Series can be widely used for Indoor Excellent for Offices, Hallways, Multipurpose Rooms , Office Buildings, Conference Rooms,super market, store and many other applications.

QuadForceTM Tunable LED Half Cutoff Wall Pack

• UL DLC Certificate
• IP65 driver, input voltage AC100-277V
• Easy to install and operate
• 5 Year warranty
• Instant start, No flickering, No humming
• Energy Efficient and No Mercury

SUN-SL Series Sport Light

• UL and DLC Certificate
• Input voltage 100-277Vac
• No UV or IR inthebeam
• Easy to install and operate
• Energy saving, long lifespan
• Instant start, NO flickering, NO humming
• Green and eco-friendly without mercury

MFD07 Series Flood Light

Model No. MFD08-150W/200W/250W/300W/350W Light Type Flood Light Input Wattage 40W-300W Voltage 100-277VAC or 347-480VAC 50/60Hz Delivered Lumens (lm) 5600lm-41000lm Efficacy (lm/W) 130-140lm/W Power Factor >0.9 Color Temperature 5000K CRI >70 Equivalent Wattage 450-2000W HID IP Rating Wet Location LED Chips N/A Material Aluminum,Glass or PC Dimming Compatible No Operating Temperature -4F – 113F Life Spam […]

CES-DW-4OT Downlight

The Ecomax split LED Commercial Downlight series have been optimized to the third generation. The innovative separable design of junction box and housing makes it more flexible, With 70° beam angle, the 6″ split commercial downlight can fulfill a wide range of lighting needs. Easy-fit installation comes from adjustable spring-action housing clips. It is designed and engineered for recessed applications, which is suitable for commercial and public places and elegantly decorates the ambience, such as shopping mall, hospital, airport, hotel lobby, etc. Tunable white function is available in 3000K,4000K and 5000K by switch.

ZY-R4/R7 Series LED Magic Troffer

• Quick installation in under five minutes
• External UL Listed Class-2 Constant Current Driver• Multiple mounting options
• Suitable for damp locations
• Minimize labor and recycling costs
• Ease of installation and maintenance
• 0-10V dimming
• 7 Year Manufacturer’s Warranty
• Emergency Battery option available

Post Top Area Light TP325

• -Type V or IV optics produce a uniform distribution which is perfect for parking lots and pathways.
• -Cutting edge LED technology provides maintenance-free operation combined with significant reduction in energy consumption.
• -Add all that to a standard tenon top pole and you’ve got a simple and effective lighting solution.

Bollard Lights

 Optical design, improved  light utilization and evenness.
 High efficiency LED Driver, voltage AC120-277V.
 Cast Aluminum design, better cooling and light quality
 Excellent efficacy ≥130lm/w.

T-Grid Architectural Linear Recessed

T-Grid LED can be installed in many configurations by replacing any of the cross tees between the main runners of the grid ceiling assembly.

ROUND POST TOP LIGHT

• Beam angle:120 degrees.
• Environment friendly ,energy saving (70~80%).
• Streamline exterior design, beautiful appearance.
• Green, energy saving, long and reliable life of 50,000

Square Post Top Light

• Beam angle:120 degrees.
• Environment friendly ,energy saving (70~80%).
• Streamline exterior design, beautiful appearance.
• Green, energy saving, long and reliable life of 50,000

YR-TP890 Series Street Light

• Beam angle:120 degrees.
• Environment friendly ,energy saving (70~80%).
• Streamline exterior design, beautiful appearance.
• Green, energy saving, long and reliable life of 50,000 hours.
• No RF interference, No IR/UV radiation ,no mercury pollution.
• Wide color options available
• Special circuit design, each LED workS separately,avoiding the single broken LED influence problem.

UV Corn Light

• Ozone free, UV Corn Light available with E26, E27, E39 base
• Built in Microwave and PIR sensor controlled by IR remote
• 20 Second time delay start
• Tri-pod stand available

U12 UV Linear Highbay

• UVC UFO Linear Highbay available in 2ft, 3ft, and 4ft
• Built in Microwave and PIR sensor controlled by IR remote
• 20 Second time delay start
• Quartz tube held inside protective wire guard

MVT03 Vapor Tight Strip

•  Up to 95W output 13000 lumens with all 2 feet long.
• Two die-cast aluminum separable structures are fixed by elastic sheets.
• Through hole heat dissipation design to achieve longer life.
• Parking garage and low bay photometry for selection.
•  Standard 1-10V dimming and optional motion sensor for energy saving. ● Surface or Pendant mounting available.
• Optional emergency battery for emergency needs.
• Operating temperature is -40℃ to 45℃(-40℉ to 113℉). ● UL/cUL wet location and DLC qualified.

Slip Fitter in White color

Slip fitter only use with SHOEBOX LIGHT

New Slip Fitter

Mount An optional cast aluminum mast arm adapter secures fixture head to nominal 2”(2-3/8”O.D. pipe size) horizontal steel tenon arm.

New Arm Mount

Mount 4″ and 5″ Square and Round poles. Standard versatile mounting arm is simple to install and can be used with existing poles for retro installations.

Trunnion

Easy to install for direct wall mounting with 1/2″ conduit wiring.

Slip Fitter Adaptor

2-3/8” OD Horizontal Tenon Mid-Pole Bracket is designed to mount light fixture that is equipped with a adjustable slip-fitter onto a 2-3/8” OD horizontal tenon.

Universal Pole Mount

SFARM2 Mount An optional cast aluminum mast arm adapter secures fixture head to nominal 2”(2-3/8”O.D. pipe size) horizontal steel tenon arm.

Wall Mount 90° Bracket

The 90˚ wall mount bracket with 2-3/8″ tenon attaches flood and area fixtures to almost any surface: wall, roof, or wood pole. Provides wiring access and a built-in 2-3/8″ O.D. tenon to mount a fixture with our adjustable slip-fitter. Suggested 3/8″ diameter bolts for mounting. Mounting holes are spaced 3-1/4″ apart.

90° Wall Mount Bracket with 2-3/8″ O.D. Tenon

90° Wall Mount Bracket with 2-3/8″ O.D. Tenon

Round Bar Adapter

Square tube light bar installation, with Arm installation of lamps.

Round Bar Adapter for Arm Mount

Square tube light bar installation, with Arm installation of lamps.

Round Tenon Adaptor 3 inch

For use with Round, non-tapered steel and aluminum poles. Furnished with three 3/8″ hex head stainless-steel bolts. Vertical tenon measures 2-3/8″ O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally.

Round Tenon Adaptor 4 inch

For use with Round, non-tapered steel and aluminum poles. Furnished with three 3/8″ hex head stainless-steel bolts. Vertical tenon measures 2-3/8″ O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally.

Round Tenon Adaptor 5 inch

For use with Round, non-tapered steel and aluminum poles. Furnished with three 3/8″ hex head stainless-steel bolts. Vertical tenon measures 2-3/8″ O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally.

Square Tenon Adaptor 4 inch

For use with square, non-tapered steel and aluminum poles. Furnished with four 5/16″ hex head stainless-steel bolts. Vertical tenon measures 2-3/8″ O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally.